WEBVTT

1
00:00:00.000 --> 00:00:03.999
This video shows you how to install a hard disk into
your printer.

2
00:00:04.000 --> 00:00:10.999
Turn off the printer.

3
00:00:11.000 --> 00:00:15.999
Unplug the power cord from the electrical outlet, and
then from the printer.

4
00:00:16.000 --> 00:00:30.999
Using a flat-head screwdriver, remove the controller
board shield.

5
00:00:34.000 --> 00:00:47.999
Remove the hard disk port cover from the controller
board shield.

6
00:00:48.000 --> 00:01:31.999
Unpack the printer hard disk.

7
00:01:32.000 --> 00:01:52.999
Assemble the hard disk.

8
00:01:53.000 --> 00:02:41.999
Attach the hard disk to the controller board shield.

9
00:02:42.000 --> 00:02:57.999
Connect the hard disk interface cable to the controller
board, and then attach the controller board shield.

10
00:02:58.000 --> 00:03:05.999
Install the screws.

11
00:03:06.000 --> 00:03:08.999
Connect one end of the power cord to the printer.

12
00:03:09.000 --> 00:03:17.999
To avoid the risk of fire or electrical shock, connect
the other end of the power cord to an appropriately rated and properly grounded electrical outlet.

13
00:03:18.000 --> 09:33:18.999
Turn on the printer.