WEBVTT

1
00:00:00.000 --> 00:00:04.999
This video shows you how to replace the black imaging
unit of your printer.

2
00:00:05.000 --> 00:00:20.999
When the black imaging unit needs replacement, an error
message appears on the printer display. Touch More information to know about the error message.

3
00:00:21.000 --> 00:00:24.999
Open door B.

4
00:00:25.000 --> 00:00:31.999
Remove the toner cartridges.

5
00:00:32.000 --> 00:00:33.999
Remove the waste toner bottle.

6
00:00:34.000 --> 00:00:38.999
To avoid spilling the toner, place the bottle in an
upright position.

7
00:00:39.000 --> 00:00:47.999
Disconnect the imaging kit cable, and then remove the
imaging kit.

8
00:00:48.000 --> 00:00:55.999
Place the imaging kit on a clean flat surface and in
an uplifted position to avoid scratching or damaging the photoconductor drum.

9
00:00:56.000 --> 00:01:01.999
Remove the used black imaging unit from the imaging
kit.

10
00:01:02.000 --> 00:01:10.999
Unpack the new black imaging unit.

11
00:01:12.000 --> 00:01:16.999
Remove the packing material from the new imaging unit.

12
00:01:17.000 --> 00:01:24.999
To avoid print quality problems, do not touch the photoconductor
drum, and do not expose it to light for more than 10 minutes.

13
00:01:25.000 --> 00:01:30.999
Insert the new black imaging unit into the imaging
kit, and then lock it.

14
00:01:31.000 --> 00:01:41.999
Insert the imaging kit, and then connect the imaging
kit cable.

15
00:01:42.000 --> 00:01:45.999
Insert the waste toner bottle.

16
00:01:46.000 --> 00:01:52.999
Insert the toner cartridges.

17
00:01:53.000 --> 09:31:53.999
Close door B.