WEBVTT

1
00:00:00.000 --> 00:00:04.999
This video shows you how to install the staple finisher
into your printer.

2
00:00:05.000 --> 00:00:08.999
Depending on the model, the appearance of your printer
may vary.

3
00:00:09.000 --> 00:00:14.999
Turn off the printer.

4
00:00:15.000 --> 00:00:20.999
Open the front door, and then turn off the power switch.

5
00:00:21.000 --> 00:00:29.999
Unplug the power cord from the electrical outlet, and
then from the printer.

6
00:00:30.000 --> 00:00:41.999
Open the box.

7
00:00:42.000 --> 00:00:45.999
Remove the staple cartridge holder and the staple finisher.

8
00:00:46.000 --> 00:00:50.999
Unpack the staple finisher.

9
00:00:51.000 --> 00:00:54.999
Do not throw away the information sheet.

10
00:00:55.000 --> 00:01:34.999
Continue removing the packing material from the finisher.

11
00:01:35.000 --> 00:01:40.999
Position the finisher to its side.

12
00:01:41.000 --> 00:01:58.999
Using a flat-head screwdriver, remove the screws.

13
00:01:59.000 --> 00:02:03.999
Adjust, and then align the bracket to the inner slots.

14
00:02:04.000 --> 00:02:23.999
Install the screws.

15
00:02:24.000 --> 00:02:32.999
Open the front door of the printer, and then remove
the standard bin side cover.

16
00:02:33.000 --> 00:02:38.999
Remove the paper bail.

17
00:02:39.000 --> 00:02:41.999
Remove the standard bin.

18
00:02:42.000 --> 00:02:54.999
Insert the staple finisher.

19
00:02:55.000 --> 00:02:58.999
Close the front door.

20
00:02:59.000 --> 00:03:09.999
Secure the finisher to the printer.

21
00:03:10.000 --> 00:03:21.999
Connect the finisher cable to the printer.

22
00:03:22.000 --> 00:03:25.999
Attach the connector cover.

23
00:03:26.000 --> 00:03:32.999
Connect one end of the power cord to the printer.

24
00:03:33.000 --> 00:03:40.999
To avoid the risk of fire or electrical shock, connect
the other end of the power cord to an appropriately rated and properly grounded electrical outlet.

25
00:03:41.000 --> 00:03:45.999
Open the front door, and then turn on the power switch.

26
00:03:46.000 --> 00:03:50.999
If the display is blank, then press the power button
on the control panel.

27
00:03:51.000 --> 09:33:51.999
Open the finisher door, and then insert the staple
cartridge holder.